Ammonium Metatungstate Prepares WO3 Contained Hydrodesulfurization Catalyst
Boehmite is the main raw material to produce aluminum oxide. γ-Al2O3 obtained by the calcination of boehmite as the carrier, and load nickel oxide and tungsten trioxide, add a additive-fluorine, thus to produce tungsten trioxide hydrodesulfurization catalyst with high activity. The different purities of boehmite have a certain degree of influence on the activity of the desulfurization catalyst.
Low-purity boehmite prepares WO3 hydrodesulfurization catalyst
1. Take aluminum hydroxide powder generated by aluminum sulfate- sodium aluminate method from boehmite with a purity of 35% by weight, add the extrusion aid and water, extruded strip of 1.2 mm in diameter, dry in an oven at 120 ℃for 4 hours and then roasted at 550 ℃ in a tube furnace under the air for 4 hours to obtain γ-Al2O3 (A);
2. Dissolve ammonium fluoride in deionized water, add the carrier which is cooled down to room temperature for impregnation for 4 hours at room temperature;
3. Separate and dry the wet fluorinated alumina bar in an oven at 120 ℃ for 4 hours, then heated at 500 ℃ in a tube furnace with dry air for 4 hours to obtain fluorinated alumina strip, removed and cooled down to room temperature;
4. Add fluorided alumina to the deionized water containing with ammonium metatungstate and nickel nitrate, and separate after dip at room temperature for 4 hours to obtain wet catalyst;
5. Dry the wet catalyst in an oven at 120 ℃ for 4 hours, and calcine under the air in a tube furnace at 500 ℃ for 4 hours to obtain the catalyst A.
High-purity boehmite prepares WO3 hydrodesulfurization catalyst
1. Take aluminum hydroxide powder (obtained from the hydrolysis of aluminum alkoxide) with the boehmite purity of 70% by weight, add extrusion aid and water, then squeeze to a strip with a diameter of 1.2 mm, dry in an oven at 120 ℃ for 4 hours, then calcine at 550 ℃ for 4 hours in a tube furnace accompanying with the air to give γ-Al2O3 (B);
2. γ-Al2O3 (B) for the preparation of the carrier catalyst B, the same preparing method of the low purity boehmite.
Analysis showed that the aluminum oxide generated from high-purity of boehmite has the larger amount of acid, while the boehmite prepared by calcination has a larger amount of strong acid; tungsten desulfurization catalyst B prepared by aluminum alkoxide hydrolysis of a high-purity oxide boehmite has a higher activity.
AMT Supplier : Chinatungsten Online - http://ammonium-metatungstate.com
Tel.: 86 592 5129696; Fax: 86 592 5129797 Email: sales@chinatungsten.com
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
More details of the above news and/or products, please visit Chinatungsten Online, or contact us directly.
Disclaimer: The article is only reflecting the opinions of the author. We have no responsibility to prove the originality and authenticity of the content, words and/or pictures. You readers should just take it as reference and check the details by yourselves. And the content is not a suggestion for investment decision. The investor takes his or her own risks if he or she operates accordingly. If you have any dissent about the contents above, please contact the relevant author, or the webmaster. We will try our best to assist the dealing of the related issues. Thanks for your visit and cooperation.
|
